Ascher Racing F64-SC V3

 

• Simucube Wireless wheel
• Average battery runtime: 800h (rechargable)
• 285mm diameter
• Maximum grip level from closed, ergonomic rubber grips
• 14 x push buttons with tactile feeling
• 2 x multifunctional 7-way joysticks
• 2 x encoders (inc. push button functionality)
• 2 x 12-position rotary switches
• 2 x thumb encoders
• Magnetic paddle shifters
• Contactless motorsport clutch paddles

NEW FEATURES

Compared to its previous model, the F64 V3 features new encoder, joystick and rotary knobs, as well as new thumb encoders and new motorsport clutches.

• New knobs improve the ergonomics and the feedback of the buttons
• New thumb encoders allow to change setting while driving without taking the hand of the wheel
• New motorsport clutch
  • Waterproof IP67, shock resistant, wide temperature range (-40°C to 125°C)
  • smooth operation due to pre-tensioned ball bearing design 
  • contactless, on-axis hall sensor for linear & unlimited operation 
  • designed for harsh real racing environment 
  • precise and repeatable driver input 

Additionally, the average battery (rechargeable) runtime of the wireless version is 800h.

 

64 INPUTS

• 14 x push buttons with positive tactile feeling
• 2 x protective button guards
• 2 x multifunctional 7-way joysticks (4 directions / rotate clock- anticlockwise/ push button)
• 2 x encoders inc. push button functionality, aluminium knob
• 2 x 12-position rotary switches, aluminium knob
• 2 x thumb encoders
• 2 x paddle shifters
• 2 x motorsport clutch paddles with electronic bite-point calibration

MAGNETIC PADDLE SHIFTERS

• cnc machined and anodized out of automotive aluminium
• designed for motorsports
• strong snap-action force
• alternative magnets to reduce force included
• reliable automotive switch

 

CONTACTLESS CLUTCH PADDLES

• designed for motorsports
• contactless, on-axis hall sensor for linear & unlimited operation 
• precise and repeatable driver input 
• Waterproof IP67, shock resistant, wide temperature range (-40°C to 125°C)
• smooth operation due to pre-tensioned ball bearing design 
• designed for harsh real racing environment 
• precision cnc machined aluminium design 
• market leading compact design

ELECTRONIC BITE-POINT CALIBRATION

• precise adjustments in 1.0 % and 0.1 % increments
• change bite-point via configuration tool or directly on the wheel rim:
  1. push both joystick buttons for 1s to acces bite-point mode
  2. LED lights up to indicate calibration mode
  3. rotate left joystick for 1.0 % increments / right joystick for 0.1 % increments (LED flashes to indicate changes)
  4. exit calibration mode by pushing both joysticks again for 1s
• recommended procedure for finding best setting:
  1. enter calibration mode and set bite-point to high value, e.g. 80 %
  2. pull slave clutch only
  3. apply throttle
  4. reduce bite-point in 1.0 % increments (left joystick) until vehicle starts moving
  5. make test starts to fine tune desired bite-point setting
  6. exit bite-point calibration mode
• recommended procedure for quick race starts
  1. pull both master and slave clutches
  2. apply throttle
  3. race start -> let master clutch snap
  4. it will take less than 20 ms to reach desired bite-point
  5. slowly release slave clutch

Encoder & 12-Position switch Modi (only F64-SC feature):

• 2 modes of the top two encoders, adjustable by switches on the back: (push btn / shift)

1. Mode: push btn. = normal encoder incl. push button
2. Mode: shift = double encoder (normal turn / push and turn)

e.g. normal turning = encoder 1 = TC

e.g. push & turn = Encoder 2 = ABS

2 modes of 12-position rotary switches, (12-pos. / shift)

12-pos. = normal mode, each position gives a signal

 

 

• 2 modes of 12-position rotary switches, (12-pos. / shift)

1. Mode: 12-pos. = regular mode, each position gives a signal
2. Mode: shift = shift function of the thumb encoder

e.g. 12-position rotary on position 1 = thumb encoder output 1 (e.g. TC)

e.g. 12-position rotary on position 2 = thumb encoder output 2 (e.g. ABS)

e.g. 12-position rotary on position 3 = thumb encoder output 3 (e.g. volume)

e.g. 12-position rotary on position 2 = thumb encoder output 2 (e.g. ABS)

e.g. 12-position rotary on position 3 = thumb encoder output 3 (e.g. volume)

 

HIGH QUALITY FINISH

• Maximum grip level from closed, ergonomic rubber grips
• machined out of automitive aluminium
• black anodized and laser engraved
• brushed frontplate surface finish
• glass bed blasted paddle surface finish

BUTTON LABELS

• 50 pcs button labels each black and white
• 72 pcs encoder labels (blue, green, red, black, yellow, white)
• labels for various common steering wheel inputs

GENERAL INFORMATION

• 285 mm wheel diameter
• 6 x 70 mm bolt pattern
• robust, shielded coiled cable with industrial Binder M16 connector
• coiled cable connector length approx. 64cm
• spacer may be required to create sufficient clearance to the wheel base
• M5 x 12 mm stainless screws to mount QR included
• Quick Release not included
• to mount M5 threaded QRs, use captive screws
• mass: 1140 g

COMPATIBLE WHEELBASES

• Simucube 2 
• Simucube 1 (OSW, Mige)